mobile polyurethane foam spray machine,polyurethane spray foam
machinery tools
Mobile Polyurethane Spray Machine 380V / 220V Voltage Coaxial
Structure Design
Spec:
| Max operation pressure (Mpa) | 20Mpa |
| Max output flow | 6-8kg/min |
| Power of heater | 9kw |
| Length of standard heat-insulated material tube | 30Meter |
| Standard raw material mix proportioning (A:B) | 1:1 |
| Operation air pressure | 0.6-0.8Mpa |
| Power supply for equipment | 380V/220V |
| Air supply for equipment (air compressor) | 1Mpa |
| Air discharge | ≥1.2M3/minute |
| Gross weight | 250KG |
| Packing size | 1000*900*1500mm |
Feature
1- Pneumatic motor
The pneumatic motor adopt the latest direction-change for double
direction work, has more stable performance compare to electric
one, suitable for complicated sitework condition.
2- High precision proportion pump
The proportion pump is made from stainless steel, to reduce the
abrasion to seals, lengthen the machine life. Equipped with oil
tank for DOP solvent used for cleaning the scrap material.
3- Main machine heating system
The main machine adopt separate aluminum heater, equipped with
powerful heating bar for better heating capacity, suitable for low
temperature work in winter. The temperature control system with
number display, with measuring and overload protection system to
control temperature exactly.
4- Hose heating system
The two hose is heated separately with latest wrapped inside
heating technology, it is much more better than the traditional
one, to ensure the material has best temperature and viscidity
before mixing and spraying.
Describe:
1. The equipment has obtained CE certification, safe and
environmental protection.
2. Having the proprietary property rights in design and production,
several national patents have been applied and approved.
3. The perfect coaxial structure design of the horizontal booster
pump reduces greatly the abrasion of the sealing. There is no
pressure difference during operation and the commuting pressure
fluctuation value is ideal and stable.
4. The lubricant inside the anti-solidifying lubricating cylinder
circulates with high speed so that the leaked material and
impurities could be brought away rapidly. The shaft for black
material is always kept in the lubricant avoiding the
crystallization.
5. The delicate coupling structure is easy for the dismounting of
the booster pump during the maintenance. When necessary, the
complete unilateral raw material pump can be replaced to change the
proportion of the raw material.
6. The pneumatic commuting control assembly is simple in structure
and reliable in operation, and enables the pump body operating
normally during the lack of electricity.
7. The design and application of the reset function when shut down
realizes the dual protection.
8. The dual filters of the equipment for both high and low pressure
and the filter of the nozzle realize the triple filtration
protection for the raw material and reduce the blocking.
9. The special armoured temperature sensor inside the heater can
collect the temperature signal at any time, hence the overshooting
value for heating is well controlled.
Use area:
Building exterior wall, cold storage, automobile, chemical storage
tank, workshop workshop, grain depot, farm shed and so on.
Picture:
